6 New Home Problems That You Must Be Detected Before Moving in

Nowadays, receiving a poorly constructed new house is not uncommon. In new condition, it is difficult to suspect or detect any hidden issues in your house. You have to move in and reside with active electricity, gas and water supplies before detecting any flaws.

Therefore, the key to avoiding issues like these are to keep a keen eye on the property before settlement. Having this prior knowledge will help the buyer rectify the problems before moving in. Here are five common defects that usually appear during an average building inspection.

1. Damages to the roof, flashing and walls
Roof issues cannot be spotted on the first glance unless there is a noticeable leak. Defects can remain hidden beneath the surface of the attic and cause severe damage before getting discovered. Majority of professional inspections lead to the detection of issues with roofing and flashing walls that have already caused severe damage by then. It is better to get a building inspector to get an up-close inspection of the roof areas to detect any trouble before it causes expensive damage.

2. Faults in the HVAC system
A thorough inspection can detect hazardous problems in the HVAC system, the most common of which includes:
• A disconnection between the gas-fired furnace and vent pipes that runs the risks of carbon monoxide entering your residence.
• Thermostats not responding to normal functions.
• Poor ventilation problems leading to poor airflow and condensation issues inside your house.

3. Poor plumbing work
You certainly want to avoid plumbing blunders in your new homes in Boorowa. Leaks in the plumbing lines can certainly cause severe damage and growth of moulds. Here are some common blunders that lead to plumbing issues in a newly built home:
• Improperly glued PVC pipes that gradually develop leaks
• Poorly connected drain stoppers
• Ill-fitted drain pipes

4. Problems with your drainage system
Poor fitted or clogged gutters and downpipes can lead to a poor drainage system. This is another issue in your new home that needs to be addressed beforehand. Otherwise, the water can leak into the base of your house and create moisture problems. This will result in damages to the subflooring, joists, and walls and in extreme cases rotting of woods and termite infestation.

5. Electrical issues in your new homes
There are some common electrical problems that will not be obvious to the average home buyers. The average electrical problems with your new homes are related to fire and safety hazards. Here are some of the most common electrical errors that can be detected:
• Insecure wires that can cause a fire
• Disconnected coupler that stresses on the main electrical panel
• Missing switch plates or receptacle covers
• Incorrectly wired outlets
• Improperly connected ground wire
• Wrong sized wires or breakers

6. Other miscellaneous problems
Apart from all the aforementioned issues, when you purchase or construct your new homes in Young suburbs or any other places in Australia, your home designer might make these mistakes that you should check carefully before moving in, such as:
• Incomplete doorways
• Improperly built fire-rated assembly line for attic stairs
• Poorly fitted or sealed windows
• Below par grading that could lead to water outflow and foundation damage.